📐 AC Sizing Guide — Palm Beach County

AC Tonnage Per Square Foot in Boca Raton, FL
The Rule of Thumb — and Why It Breaks

Ask ten contractors how many tons your Boca home needs and you will get ten answers, most of them starting from the same shortcut: so many square feet per ton. The shortcut is not useless — it is a decent starting point. But in a Florida house, where the sun load, the attic, and twenty years of additions all push against it, the shortcut is also where most sizing mistakes begin. Here is the rule, the math, and the five things that break it.

An ADS technician at an outdoor condenser with manifold gauges and a refrigerant tank

Sizing Is Measured at the Equipment, Not Guessed From a Chart

An ADS technician at an outdoor condenser with manifold gauges and a refrigerant tank — the right tonnage is confirmed with a load calculation and real readings, not a square-footage shortcut — Air Duct Specialists LLC

AC tonnage per square foot in Boca Raton, FL is the question every homeowner asks before replacing a system — and it is the question most often answered with a number that is wrong for their house. Start with the rule itself. One ton of cooling equals 12,000 BTU per hour — the amount of heat the system can remove from your home in an hour. It has nothing to do with how much the unit weighs. The common Florida rule of thumb is 500 to 600 square feet per ton, which works out to about 20 to 22 BTU per square foot. At that math, a 2,000-square-foot Boca home lands at roughly 3.5 to 4 tons: 2,000 × 22 = 44,000 BTU per hour, and 44,000 ÷ 12,000 = 3.67 tons. A 1,500-square-foot home works out to about 2.5 to 3 tons; a 3,000-square-foot home, about 5 tons.

That math is a reasonable starting point, and the Florida-adjusted figure of 22 BTU per square foot is a better ceiling check than the national shortcut of one ton per 400 square feet, which pushes a lot of Florida houses too big. But the rule of thumb is the same for every house of the same size — and no two Boca houses are the same. It treats a 2,000-square-foot ranch in Boca West and a 2,000-square-foot two-story in Royal Palm Yacht & Country Club as identical loads. They are not, and the difference can be a ton or more. Treat the rule as a planning estimate, not a design number — and never let anyone sell you a system sized by square footage alone.

Five Things That Break the Rule of Thumb in Boca

A Manual J load calculation — the ACCA standard for sizing — accounts for all of these, which is why it exists. The five that matter most in Boca Raton:

People and kitchens count too: every additional occupant beyond two adds about 600 BTU, and a kitchen adds roughly 4,000 BTU. None of that shows up in a square-footage shortcut — which is the point. The shortcut is a ceiling check. The load calculation is the answer.

Albert of Air Duct Specialists in a South Florida attic giving a thumbs-up during an assessment

The Attic Tells the Story

Albert of Air Duct Specialists in a South Florida attic during an assessment — sizing is judged in the attic and at the air handler, not by a square-footage rule of thumb — Air Duct Specialists LLC

What Happens When the Tonnage Is Wrong

Both directions cost you, in different ways, and both are common in Boca. An oversized unit — the result of the "bigger is better" instinct, or the national 400-square-feet-per-ton shortcut — cools too fast and shuts off before it has run long enough to pull humidity out of the air. The house feels cool but clammy, the unit short cycles, and the constant starting and stopping wears the equipment out faster while mold risk rises. An undersized unit is the mirror image: it runs all day, never reaches the thermostat, and the temperature creeps up every afternoon while the compressor never gets a rest. Both burn more energy than a right-sized system, and neither delivers the comfort you paid for. If your system is between two sizes, the smaller one is often the better Florida choice after a real Manual J — not a bigger "just in case" unit, because in Florida the humidity penalty of oversizing is the costlier mistake.

How to Get the Right Number for Your House

Use the rule of thumb to sanity-check the quote, then insist on the load calculation. A proper Manual J accounts for your square footage, ceiling height, windows and sun exposure, insulation, ductwork, and every addition since the original unit was sized — and the equipment should not be much bigger than the load it calculates. If a contractor quotes a size without measuring a window or asking about additions, that quote is a guess, and a guess is how you end up with a clammy house or a unit that never shuts off. Air Duct Specialists LLC offers guaranteed best pricing on new air conditioner installations across South Florida, with $0 down and 0% interest financing available, and the estimate is free — including the load calculation that sizes the system for your house as it is today, not the house it was twenty years ago.

Replacing Your AC? Get the Right Size, Free

Air Duct Specialists LLC serves Boca Raton and all of Palm Beach County. Licensed CAC1825166. Fully insured. 350 five-star reviews. Same-day service, 7 days a week, 7am–11pm. Free estimates — what we quote is what you pay.

📞 (561) 331-6777 — Palm Beach
📋 Request a Free Estimate Online

Frequently Asked Questions

How many square feet per ton of AC do I need in Boca Raton?

The common rule of thumb is 500 to 600 square feet per ton in Florida, or about 20 to 22 BTU per square foot — so a 2,000 square foot home works out to roughly 3.5 to 4 tons. But that is a starting point, not a design number: ceiling height, sun exposure, windows, insulation and additions can move the real answer by a ton or more, and a Manual J load calculation is what sizes a system properly.

What is one ton of air conditioning?

One ton of cooling equals 12,000 BTU per hour — the amount of heat the system can remove from your home in an hour. It has nothing to do with how much the unit weighs. Residential systems in Boca Raton typically range from 1.5 to 5 tons.

Is the square-footage rule of thumb enough to size an AC in Florida?

No — not on its own. The rule of thumb treats every house of the same size as identical, and no two Boca houses are. A Florida-adjusted figure of about 22 BTU per square foot is a better ceiling check than the national 1-ton-per-400-square-feet shortcut, which pushes many Florida homes too big. The durable answer is an ACCA Manual J load calculation, which accounts for your home's windows, insulation, sun load, ceiling height and ductwork.

What happens if my AC is sized wrong for my Boca home?

An oversized unit cools too fast, short cycles, and never runs long enough to pull humidity out of the air — the house feels cool but clammy, and mold risk rises. An undersized unit runs all day, never reaches the thermostat, and wears out faster while the bills climb. Both cost more than a right-sized system, in comfort and in money.

Why would my Boca home need more or less tonnage than the rule of thumb says?

More tonnage if the home has high ceilings, large west-facing glass, poor insulation, a dark tile roof, or additions that were never in the original sizing. Less if the home is well insulated, shaded, has efficient windows, or was built to a newer code. In Boca, afternoon sun load and long duct runs through a 140-degree attic are the two factors that most often break the rule of thumb.

How much does AC replacement cost in Boca Raton?

We do not publish a single replacement price because it depends on size, efficiency, and the home. Air Duct Specialists LLC offers guaranteed best pricing on new installations across South Florida, with $0 down and 0% interest financing available. A free on-site estimate — including a load calculation — gives your exact figure, and what we quote is what you pay.

Related Articles

What Size AC Do I Need in Boca Raton, FL?

Square footage, ceilings, sun, and insulation — walked through

Undersized AC Runs All Day in Boca Raton, FL

The unit that never shuts off — the mirror image of oversizing